See the codec status table for the complete, daily generated list. Quite a few codecs are available for download from our homepage. Grab them from our codecs page.
The most important ones above all:
If you have a Win32 codec not listed here which is not supported yet, please read the codec importing HOWTO and help us add support for it.
This section contains information about the DivX4 and DivX5 codecs of Project Mayo. Their first available alpha version was OpenDivX 4.0 alpha 47 and 48. Support for this was included in MPlayer in the past, and built by default. We also used its postprocessing code to optionally enhance visual quality of MPEG-1/2 movies. Now we use our own, for all file types.
The new generation of this codec is called DivX4 and can even decode movies made with the infamous DivX codec! In addition it is much faster than the native Win32 DivX DLLs but slower than libavcodec. Hence its usage as a decoder is discouraged. However, it is useful for encoding. One disadvantage of this codec is that it is not available under an Open Source license.
DivX4 works in two modes:
The -vc odivx method is usually faster, due to the fact that it transfers image data in YV12 (planar YUV 4:2:0) format, thus requiring much less bandwidth on the bus. For packed YUV modes (YUY2, UYVY) use the -vc divx4 method. For RGB modes the speed is the same, differing at best according to your current color depth.
If your -vo driver supports direct rendering, then -vc divx4 may be faster, or even the fastest solution.
The DivX4/5 binary codec library can be downloaded from avifile or divx.com Unpack it, run ./install.sh as root and do not forget adding /usr/local/lib to your /etc/ld.so.conf and running ldconfig.
Get the CVS version of the OLD OpenDivX core library like this:
cvs -d:pserver:[email protected]:/cvsroot login
cvs -d:pserver:[email protected]:/cvsroot co divxcore
This core library is split into a decore and encore library that have to be compiled separately. For the decore Library, simply type
cd divxcore/decore/build/linux make cp libdivxdecore.so /usr/local/lib ln -s libdivxdecore.so /usr/local/lib/libdivxdecore.so.0 cp ../../src/decore.h /usr/local/include
Alas, for the encore library there is no Linux Makefile available, and the MMX optimized code only works on Windows. You can still compile it, though, by using this Makefile.
cd ../../../encore/build mkdir linux cd linux cp path/Makefile . make cp libdivxencore.so /usr/local/lib ln -s libdivxencore.so /usr/local/lib/libdivxencore.so.0 cp ../../src/encore.h /usr/local/include
MPlayer autodetects DivX4/DivX5 if it is properly installed, just compile as usual. If it does not detect it, you did not install or configure it correctly.
FFmpeg contains an open source codec package, which is capable of decoding streams with various audio and video codecs. It also offers an impressing encoding facility and higher speed than the Win32 codecs or the DivX.com DivX4/5 libraries!
It contains a lot of nice codecs, especially important are the MPEG-4 variants: DivX3, DivX4, DivX5, Windows Media Video 7/8 (WMV1/WMV2). Also a very interesting one is the WMA decoder.
The most recent codec deserving credit is the Sorenson 3 (SVQ3) codec. This is the first, completely opensource implementation. It's even faster than the original. Be sure to prefer this instead of the binary codec!
For a complete list of supported codecs please visit the FFmpeg homepage. Supported video and audio codecs.
If you use an MPlayer release you have libavcodec right in the package, just build as usual. If you use MPlayer from CVS you have to extract libavcodec from the FFmpeg CVS tree as FFmpeg releases are very rare. The CVS is mostly stable and offers the most features. In order to achieve this do:
cvs -d:pserver:[email protected]:/cvsroot/ffmpeg login
cvs -z3 -d:pserver:[email protected]:/cvsroot/ffmpeg co -P ffmpeg/libavcodec
Move the libavcodec directory from the FFmpeg sources to the root of the MPlayer CVS tree. It should look like this: main/libavcodec
Symlinking is not enough, you have to copy/move it!
If you prefer having libavcodec updated at the same time you update MPlayer CVS, put the following line into the main/CVS/Entries file:
D/libavcodec////
Compile. configure should detect problems before compilation.
MPlayer from CVS does contain a libavcodec subdirectory, but it does not contain the source for libavcodec! You must follow the steps above to obtain the source for this library.
With FFmpeg and my Matrox G400, I can view even the highest resolution DivX movies without dropped frames on my K6-2 500.
Be advised that the XAnim binary codecs are packaged with a piece of text claiming to be a legally binding software license which, besides other restrictions, forbids the user to use the codecs in conjunction with any program other than XAnim. However, the XAnim author has yet to bring legal action against anyone for codec-related issues.
INSTALLATION AND USAGE. MPlayer is capable of employing the XAnim codecs for decoding. Follow the instructions to enable them:
Download the codecs you wish to use from the XAnim site. The 3ivx codec is not there, but at the 3ivx site.
OR download the codecs pack from our codecs page
Use the --with-xanimlibdir option to tell configure where to find the XAnim codecs. By default, it looks for them at /usr/local/lib/codecs, /usr/local/lib/xanim/mods, /usr/lib/xanim/mods and /usr/lib/xanim. Alternatively you can set the environment variable XANIM_MOD_DIR to the directory of the XAnim codecs.
Rename/symlink the files, cutting out the architecture stuff, so they will have filenames like these: vid_cvid.xa, vid_h263.xa, vid_iv50.xa
XAnim is video codec family xanim, so you may want to use the -vfm xanim option to tell MPlayer to use them if possible.
Tested codecs include: Indeo 3.2, 4.1, 5.0, CVID, 3ivX, H.263.
MPlayer can play Vivo (1.0 and 2.0) videos. The most suitable codec for 1.0 files is FFmpeg's H.263 decoder, you can use it with the -vc ffh263 option. For 2.0 files, use the Win32 DLL through the -vc vivo option. If you do not supply command line options MPlayer selects the best codec automatically.
MPEG-1 and MPEG-2 are decoded by the multiplatform native libmpeg2 library, whose source code is included in MPlayer. We handle buggy MPEG-1/2 video files by catching Signal 11 (segmentation fault), and quickly reinitializing the codec, continuing exactly from where the failure occurred. This recovery technique has no measurable speed penalty.
MPlayer is able to play most of the older codecs used in AVI and MOV files. In the past they were decoded with binary Win32 codecs, but now we have native codecs for most of them using libavcodec.
MPlayer supports decoding all versions of RealVideo:
Download Real codecs from http://www.mplayerhq.hu/MPlayer/releases/codecs/ and extract them to the /usr/local/lib/codecs directory. If you want to store them in a different location, pass the --with-reallibdir option to configure.
RealPlayer libraries currently only work with Linux, FreeBSD, NetBSD and Cygwin on the x86, Alpha and PowerPC (Linux/Alpha and Linux/PowerPC have been tested) platforms and with Mac OS X.
XviD is a forked development of the OpenDivX codec. It happened when ProjectMayo changed OpenDivX to closed source DivX4 (now DivX5), and the non-ProjectMayo people working on OpenDivX got angry, then started XviD. So both projects have the same origin.
ADVANTAGES
DISADVANTAGES
INSTALLING XVID CVS
It is currently available only from CVS. Here are download and installation instructions (you need at least autoconf 2.50, automake and libtool):
cvs -z3 -d:pserver:[email protected]:/xvid login
cvs -z3 -d:pserver:[email protected]:/xvid co xvidcore
cd xvidcore/build/generic
./bootstrap.sh
./configureYou may have to add some options (examine the output of ./configure --help).
make && make install
If you specified --enable-divxcompat, copy ../../src/divx4.h to /usr/local/include/.
Recompile MPlayer with --with-xvidlibdir=/path/to/libxvidcore.a --with-xvidincdir=/path/to/xvid.h
Sorenson is a video codec developed by Sorenson Media and licensed to Apple who distribute it with their QuickTime Player. We are currently able to decode all version of Sorenson video files with the following decoders:
COMPILING MPLAYER WITH QUICKTIME LIBRARIES SUPPORT
Currently only 32-bit Intel platforms are supported.
download MPlayer CVS
download QuickTime DLL pack from http://www.mplayerhq.hu/MPlayer/releases/codecs/
extract QuickTime DLL pack to your Win32 codecs directory (default: /usr/local/lib/codecs/)
compile MPlayer
The most important audio codecs above all:
This is the default decoder used for files with AC3 audio.
The AC3 decoder can create audio output mixes for 2, 4, or 6 speakers. When configured for 6 speakers, this decoder provides separate output of all the AC3 channels to the sound driver, allowing for full "surround sound" experience without the external AC3 decoder required to use the hwac3 codec.
Use the -channels option to select the number of output channels. Use -channels 2 for a stereo downmix. For a 4 channel downmix (Left Front, Right Front, Left Surround and Right Surround outputs), use -channels 4. In this case, any center channel will be mixed equally to the front channels. -channels 6 will output all the AC3 channels as they are encoded - in the order Left, Right, Left Surround, Right Surround, Center and LFE.
The default number of output channels is 2.
To use more than 2 output channels, you will need to use OSS, and have a sound card that supports the appropriate number of output channels via the SNDCTL_DSP_CHANNELS ioctl. An example of a suitable driver is emu10k1 (used by Soundblaster Live! cards) from August 2001 or newer (ALSA CVS is also supposed to work).
You need an AC3 capable sound card, with digital out (S/PDIF). The card's driver must properly support the AFMT_AC3 format (C-Media does). Connect your AC3 decoder to the S/PDIF output, and use the -ac hwac3 option. It is experimental but known to work with C-Media cards and Soundblaster Live! + ALSA (but not OSS) drivers and DXR3/Hollywood+ MPEG decoder cards.
libmad is a multiplatform, integer (internally 24bit PCM) only MPEG audio decoding library. It does not handle broken files well, and it sometimes has problems with seeking, but it may perform better on FPU-less (such as ARM) platform than mp3lib.
To enable support, compile with the --enable-mad configure option.
The audio codec used in VIVO files depends on whether it is a VIVO/1.0 or VIVO/2.0 file. VIVO/1.0 files have g.723 audio, and VIVO/2.0 files have Vivo Siren audio. Both are supported.
MPlayer supports decoding nearly all versions of RealAudio:
Instructions on how to install the RealPlayer libraries are in the RealVideo section.
QDesign audio streams (fourcc:QDMC, QDM2) are found in MOV/QT files. Both versions of this codec can be decoded with QuickTime libraries. For installation instructions please see the Sorenson video codec section.
Qualcomm audio streams (fourcc:Qclp) is found in MOV/QT files. It can be decoded with QuickTime libraries. For installation instructions please see the Sorenson video codec section.
AAC (Advanced Audio Coding) is an audio codec sometimes found in MOV and MP4 files. An open source decoder called FAAD is available from http://www.audiocoding.com. MPlayer includes a CVS snapshot of libfaad 2.1 beta, so you do not need to get it separately.
If you use gcc 3.2 which fails to compile our internal FAAD or want to use the external library for some other reason, download the library from the download page and pass --enable-external-faad to configure. You do not need all of faad2 to decode AAC files, libfaad is enough. Build it like this:
cd faad2/ sh bootstrap ./configure cd libfaad make make installBinaries are not available from audiocoding.com, but you can (apt-)get Debian packages from Christian Marillat's homepage, Mandrake RPMs from the P.L.F and RedHat RPMs from Grey Sector.
VFW (Video for Windows) is the old Video API for Windows. Its codecs have the .DLL or (rarely) .DRV extension. If MPlayer fails at playing your AVI with this kind of message:
UNKNOWN video codec: HFYU (0x55594648)
It means your AVI is encoded with a codec which has the HFYU fourcc (HFYU = HuffYUV codec, DIV3 = DivX Low Motion, etc.). Now that you know this, you have to find out which DLL Windows loads in order to play this file. In our case, the system.ini contains this information in a line that reads:
VIDC.HFYU=huffyuv.dll
So you need the huffyuv.dll file. Note that the audio codecs are specified by the MSACM prefix:
msacm.l3acm=L3codeca.acm
This is the MP3 codec. Now that you have all the necessary information (fourcc, codec file, sample AVI), submit your codec support request by mail, and upload these files to the FTP site: ftp://ftp.mplayerhq.hu/MPlayer/incoming/[codecname]/
On Windows NT/2000/XP search for this info in the registry, e.g. search for "VIDC.HFYU". To find out how to do this, look at the old DirectShow method below.
DirectShow is the newer Video API, which is even worse than its predecessor. Things are harder with DirectShow, since
New Method:
Using Microsoft GraphEdit (fast)
Get GraphEdit from either DirectX SDK or doom9
Start graphedit.exe.
From the menu select Graph -> Insert Filters.
Expand item DirectShow Filters
Select the right codec name and expand item.
In the entry DisplayName look at the text in winged brackets after the backslash and write it down (five dash-delimited blocks, the GUID).
The codec binary is the file specified in the Filename entry.
If there is no Filename and DisplayName contains something like device:dmo, then it is a DMO-Codec.
Old Method:
Take a deep breath and start searching the registry...
Start regedit.
Press Ctrl+F, disable the first two checkboxes, and enable the third. Type in the fourcc of the codec (e.g. TM20).
You should see a field which contains the path and the filename (e.g. C:\WINDOWS\SYSTEM\TM20DEC.AX).
Now that you have the file, we need the GUID. Try searching again, but now search for the codec's name, not the fourcc. Its name can be acquired when Media Player is playing the file, by checking -> -> . If not, you are out of luck. Try guessing (e.g. search for TrueMotion).
If the GUID is found you should see a FriendlyName and a CLSID field. Write down the 16 byte CLSID, this is the GUID we need.
If searching fails, try enabling all the checkboxes. You may have false hits, but you may get lucky...
Now that you have all the necessary information (fourcc, GUID, codec file, sample AVI), submit your codec support request by mail, and upload these files to the FTP site: ftp://ftp.mplayerhq.hu/MPlayer/incoming/[codecname]/
If you want to add a codec yourself, read DOCS/tech/codecs.conf.txt.